Subject: Those low down, no compression blues
From: Paul
Date: 8/30/2000, 1:29 PM

Flush with the slot eh? Bad sign. Those springs are not very strong
to begin with and conceivable they could be encapsulated in crude
that makes them immobile. Could also be light rust like you propose.
WD 40 has done miracles in releasing slightly rusted nuts and bolts.

Paul Lamar


Ed Anderson wrote:

Hi Paul,
    Well I tried WD 40 as you suggested and worked them with a brass rod. It
took a while but I finally got the seals to move in their slot.  Now all the
apex seals on the Front Rotor are free and compression is good, I get a lot
of resistance and a loud "Whomp" when I pull it thru on all three face.
However, the seals on the Rear Rotor are still stuck.  I decided to let WD40
work overnight and will work tomorrow to see if I can unstick the apex seals
of the rear rotor.  So good suggestion.

Ed

Way to go Ed. I thought changing engines was a drastic solution.

BTW Put some of that stuff you are using in a glass dish and let it sit around
awhile until the gasoline part evaporates. There maybe something going on chemically 
to form some sort of gum. What kind of sump oil are you using?

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org