Subject: Thottle body & intake manifold construction
From: Paul
Date: 8/31/2000, 3:33 PM


That's pretty much what I did, cut the stock turbo manifold down and remove the excess material with a die grinder. What I'm left with is the flange and about ~4 inches of intake runner. I plan to weld 1" of tubing to each of the runners with an excess of bead and then contour that material with some sort of small grinder. I can then attach my intake to these with short sections of apropriate diameter hose and clamps.
Brian Trubee

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org