Subject: oil water heat exchanger
From: Paul
Date: 9/1/2000, 10:13 PM


Power Sport is struggling with that as we speak. It will take roughly
a third larger radiator. Below is the heat balance of a Mazda rotary.
The rad I designed is untested. It is my best guess based on what we
have learned from the research and experience of others over the past
two and half years. Refresh my memory on the type
of airplane you have and perhaps I can come up with a layout for you
that will work. Do you have a stock Mazda oil cooler? It will
not take much room if mounted the long way and with proper ducting.

Paul Lamar

Yvon Cournoyer wrote:

Below is the heat balance of a Mazda rotary???
Yvon Cournoyer

Opps! I checked and it did not go out. Thanks Yvon
The part labeled effective heat is the HP out of the engine.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

heat-balance-diag2.gif