bcgardner wrote:

Paul,

You wrote: "You will have to stop the fan blades from spinning

when the

power is off to the fan motor."

While I can see that this would be a good idea in order to reduce

wear on

the bearings, are there any other reasons for doing so?

No but it will really zing at 200 MPH due to dynamic pressure
being 104 pounds per square foot as opposed to only 26 pounds
per square foot at 100 MPH.

Additionally, can you explain to me how the electric stop

mechanism on an

electric lawn mower works? I have an electric mower and it kills

the blade

as soon as the power is cut. Could such a circuit be easily and

cheaply

adapted to an after-market electric cooling fan?

Barry Gardner
Wheaton, IL

You got me there. If you short a brush type DC motor that is
rotating
I think it retards the rotation. Some new DC motors are brush less
and all bets are off on those.

Paul Lamar

It could be that the brushes are shorted at shut off
and put a heavy load that stops it turning. Virg

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org