Subject: Wankel Germany - charged cooled?
From: Paul
Date: 9/7/2000, 5:14 AM

Wrathall Mark wrote:

The LCR's have a charged cooled rotor, with liquid cooling for the housings.
It also has charged lubricated roller bearings in the e-shaft (no pressure
oil system).

The two LCR engines both seems like a great idea which slightly misses it's
target.

The single rotor LCR-407 at 35 hp and 80lb seems like an ideal FAA legal
ultralight engine. It should have better BSFC than a two stroke, and
possibly run smoother. The problem is that the natural competition is Rotax,
2SI, and Hirths two-strokes which all cost about $2500-3500 from aircraft
spruce, so the airframe manufacturer would buy them in bulk for less. Would
the LCR -4907 be viable at this price?

The Twin rotor LCR-814 at 75hp and 105lb is maybe too much engine for an FAA
legal UL, so you get forced into the homebuilt market, loseing most of the
turn key, complete aircraft, buy in volume, airframe manufacturer advantage.
The natural competitors for the LCR-814 are the HKS opposed twin, that new
Citroen 2CV based thing (weird choice), the converted VW's and the bigger
two-strokes. I'm not so sure it can go head to head against the Rotx 912
(80hp) 912S (100hp) 914 (115hp) or the two Jabirus. Most of the samller
homebuilts have been designed around the VW or the 912. Both of these
engines are substantially heavier. If you try and fit an LCR-814 into a
KR-2S you would have to put a lot of weight into the nose to compensate.

Is there interest in pursueing the LCR engine rights? Seriously? I have some
questions outstanding with Hr. Bax, but if we aren't serious about making an
offer then we should leave him in peace.

Designing a scaled down light weight 13B copy is another building site! This
will work if some enthusiast will please do all the development work on his
own coin, then give us the manufacturing rights free of charge :~) I'd pay
$4000 for one!

Mark Wrathall

That is the problem right there. $2500 to $3500 would give very thin margins
even if you could get the cost below those numbers. Not worth the investment.
EFI is on the horizon for two strokes that will improve the BSFC and make
them less likely to seize.

A scaled down Mazda would compete with the $9,000 Rotax 912 or 914 in turbo
form and sell roughly for the same price.

I personally am no longer interested in purchasing stock in a corporation
that would purchase Wankel GmbH. It would take one hell of a CEO and lots 
of excess capital to make that fly.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org