O.k., I just got back from Boeing Surplus, and here is what they got in- 10
12 ft long tubes of   625 Inconel  5" in dia and .125 thick- heavy stuff.
Also 70 plus 12 ft. lengths of 4.495 dia .020 thick inconel tubes. I
purchased 2 ft. of that for a potential muffler. It will probably be a bit on
the thin side for a muffler, but we'll see. I runs $6  a foot.  I think that
if Burns Stainless starts selling inconel bends, that will take care of most
of the rest of my exhaust needs.

Anyone wanting the Inconel tubes, drop me a line. The .125 thick 5" dia
should cost ~$40 a foot and the 4.495 dia .020 is $6 a foot and ~$45 to send
2  48" sections of the .020 tube to the most expensive shipping area in the
U.S., New Jersey.

Brian Trubee
Redmond, Wa

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org