norm2 wrote:
Yup- I should have known, the stock ignitor's aren't the way to go. Guess
I'll have to design my own from scratch on those too. Of course I know more
about this than the auto makers.
Yup- I figured the radiators you can buy off the shelf wouldn't work. I'm
glad we have people on the list that know more about radiators than all of
the manufacturers.
Yup- I figured that stock water pump wouldn't cut it. I could tell just by
looking at the engine that I could get 300 hp out of it, but I could also
tell just by looking at it that the water pump won't work. I sure am glad
there are people on the list that know a lot more about water pumps than
Mazda obviously knew...
Yup- I figured that every mounting system ever devised was not as good as
it should be, same for intake systems, exhaust systems, and reduction
drives. I was concerned that there might be an opportunity to buy a piece
of the shelf, but no problem! I'll just make one of each of those from
scratch also.
Yup- Those props are just not where they should be, we can build our own.
Yup- While I'm at it, I think I'll make me a new set of rotor housing with
improved cooling fins inside. Shouldn't trust Mazda to know much about
those kinds of things. Might as well make my own rotors while I am at it.
And new lightweight aluminum end housings. Sounds like there are some
improvements that can be made there as well.
Yup- No such thing as an airplane cooling system designed that will work
with a radiator, I might as well start from scratch on the airplane design.
Yup- You can't trust what they sell for paper these days. I think I will
take a paper making class at the University so I can build my own paper to
design the airplane on...
It's no wonder there are so few rotaries actually flying. The ones I saw
were using mostly stock engines and off the shelf parts. As near as I can
tell from this list, they shouldn't hardly work at all! Yup! It's a
miracle! How can it be that the people that are flying just built the goofy
thing rather than armchair design from scratch every blessed component!
Hey, I have no problem with chewing over the minutia rather than building or
flying, but I really feel sorry for those folks on the list that are trying
to learn about how to actually use a rotary engine in an airplane.
Certainly there are many elements of an automotive engine that could be
optimized for use in an airplane. But there is also a practical limit to
what projects can be taken on in the process of building an airplane and the
powerplant.
Folks- the off-the-shelf 13B looks like a pretty decent replacement for a
160 hp Lycoming. Maybe it can be stretched to that 180 or even 200 hp
region. But you can get most of the way there without tooling up for mass
production. There are a number of ignition systems that will work. There
are a number of schemes for intake and exhaust. It sure would be nice if
you could buy one off the shelf, but it appears that this group would rather
hash things to death than get a tangential muffler built that works. Heck-
the muffler that Tracy has diagrammed in his manual seems to work just fine.
Why not get a dozen people together and buy a bunch. With a dozen pieces,
you could have the parts laser cut or hydro cut, and jigged and welded. The
RV type people can use a right angle pipe coming off the motor to a piece of
flex, they pusher people can use straight headers to the flex tubing. Use
what you need to get to a muffler that turns the exhaust downward and quiets
everything down a bit.
The mounting plate that Tracy uses is a piece of cake. 1/4 inch 2024, 46
minutes on the hydrojet & Voila! Fits better than if it came from the
factory! (Of course, the first person to look at it wants to convert it to
a dry sump system for aerobatics...) I think my next project will be the
intake manifold. Looks like another casting class at the University. But in
the meantime, I think I will finish the plane and put that Lycoming on the
back end. Lets see, you can buy the engine mount, you can buy the exhaust
system, you can buy the prop, looks like most everything is available.
Yeah, some of it is a bit pricey, but at the same time at least I didn't
have to design it from scratch and tool it up!
Good post Norm :-) Can't go wrong with a Lyc :-)
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org