Subject: Tangental exhaust system
From: Paul
Date: 9/10/2000, 6:34 PM


Paul,
 recently someone posted a note saying that they had had an exhaust
system build by the same welder who does work for Dave Atkins. They said
that it was a tangental exhaust system with internal vanes, and that they
were pleased with it. Who was that, have they run it yet, and are there any
pictures available?
Brian Trubee
Redmond, Wa

This is all I have on Gary's muffler.

Paul Lamar


Tracy Crook wrote:

The following remarks are based on my recolection of Gary's systems.  Please
jump in if I got some of this wrong Gary.

Gary IS having good success with his new inconel exhaust system (which cost
him around $1000 if memory serves correct) but the point I want to make is
this:   You might get something to work by closely copying someone else who
succeded but it is much more important to gain an understanding of what
works and  * why * .

Gary's old system (which broke on a regular basis) was made of heavy wall
mild steel and the new one is inconel.  One might conclude that inconel is
the difference but I would put my money on stress.  The old system was rigid
from the exhaust flange all the way to the muffler which was about 3 feet
away.   The new system has the muffler close to the exhaust flange and
equally important, a piece of inexpensive stainless steel flex pipe between
the muffler and tailpipe.   IMHO, the "magic" is the flex pipe, not the
exotic material.  Put another way, even if the old system had been made of
inconel, it would have broken..   Or, from the cheap-skates' point of view,
the old system could have been fixed for the price of the flex pipe.

Fly safe AND cheap, but by all means, fly.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

BTW Tracy how is your new web site coming?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org