Gary Buster wrote:
I have been wheeling and dealing with gyro projects lately... Maxie Wildes
in Savannah GA now has the 12a on the Air Command Tandem..[Gary's old gyro]
I got [traded for] his "Easter Egg" project (Subaru) and have just
recently finished the airworthiness on this vehicle...
I got just over 40 hours on the [Inconel] tangential exhaust manifold before
Maxie and
I did our thing... the exhaust manifold was truly a piece of art... ran/
breathed better than the 90 degree pipe to a "Y" that I had before... the
"vanes" in the tangent worked just fine, although I didn't have a "nonvaned"
tangent to compare to.
Putting the flex pipe inline did away with a lot of the vibrations felt in
the frame during flight.
The tangent exhaust manifold was pricey at $900 (!!#$%#!!!^&*) when I was
expecting $300 to $400 as indicated by one of the guys on this list. (But
the work was beautiful!!)
I have a 6 port FI 13b core to put into my next project... as soon as
someone buys the "Easter Egg" I can cashflow the next FW [?] project instead of
a gyro! (for sale: Easter Egg gyro flying like bat outt'a hell, but stable
as a rock in flight!! $28K) My kids want me to buy a CH801 Zenair to build
and put the 13b in.
Email privately if you want pics of the Legacy Easter Egg!
Fly safe!
Gary Buster LPT
N263GB
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org