Peter Nunn wrote:
I am sure this mail will cause more mail than any other yet so here is my
comments;
I am into experimental aircraft, so I see no problem with my
experimenting
with aircraft engines, and I like to think that discussion is good not
bad.
Auto conversions have had a bad reputation in the eyes of many. The
problem
is that there are a lot of conversions that were just bolt on from a car.
The engineers that develop engines for cars look at all aspects and make
the
best decisions for that requirement, generally working with a stock set
of
components.
The same discipline should be applied when the core components are used
for
aircraft use.
Too many individuals have aircraft that are still on the ground because
there are not a well thought out set of after-market components that will
convert an engine to an airworthy state. Lycomings have been developed
to a
formula for 40 years and the lessons learned should be applied to all
conversions. Such things as redundant ignition systems (due more to the
unreliability of magnetos than anything else), the ability to have the
engine run during an electrical failure, seperate instrument sources
(vacum
and electric), dual fuel pumps (one mechanical, one electrical) are the
important lessons.
The great deal of discussion about cooling systems stems from the fact
that
most failures are cooling related, whether it is with a liquid cooled or
direct air cooled engine. There are many many people trying to get
effective baffles for rotax, jaibru, continental and lycoming engines.
If
you buy a kit and assemble it then you can expect the manufacturer to
recommend an engine/baffle combination that will work. Try a different
engine and you will have to solve the problems that this list addresses
by
yourself.
So lets stop trying to sqeeze everone into an rv6/io360 solution and
accept
that some of us like to talk about the problem to a depth that can allow
for
a rational determination of a suitable configuration.
Good post Peter. This is what experimental aircraft are all about.
Paul Lamar
Pine Pienaar wrote:
Hi
Take a look at this site. http://www.sereti.net Its a aircraft engine that was
designed from scratch. 155 Hp 120 deg V6 at 204 bl.
Pine
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org