sinkas wrote:

Would Mounting 2 stock GSLSE or RX4 type oil coolers in series or Parallel, be a good idea, or not?
Case

Yes. Given the lack of a larger oil cooler that is a good idea. 
I would connect them in parallel side by side and monitor 
the temp coming out of each one. That way you could tell if
the oil flow was even. If not a restrictor could be used to balance
the oil flow.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org