Subject: An automotive but non-rotary question..
From: Paul
Date: 9/12/2000, 3:46 PM

Charlie Kuss wrote:


Here are the symptoms. The car starts great when everything is cold.
However, when the car is warm, the starter barely turns over and actually
has left me stranded when it fails to start. A trip of 10 or 15 minutes is
enough to set this in motion.

There is apparently a lot of current running through the circuit, even
though nothing is happening. If I hold the starter on, though it is barely
cranking, I can burn the insulation right off the ground strap of the
engine.


As Paul suggested earlier, check your ground connection. If both your large cables
check out OK with a digital ohmmeter, replace the starter. The armature/field
winding insulation is shorting out when hot.
Charlie Kuss

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org