Hans Conser wrote:
I am pretty sure that the car at this link developed its 561 HP at 17 pounds of
boost and 5500 RPM, with 2mm apex seals. You can really get mucho power from this
engine if you cool the intake charge with a large intercooler and provide plenty of
fuel. 150 HP at 5500 RPM seems reasonable too.
http://www.shaneracing.com/specs.html
I just checked some old Mazda SAE papers and 150 HP is right in the
ball park for 5500 RPM and a four barrel carb. In Finn's case it is
a three barrel carb I think. Non tuned intake. Those long intake pipes
really help.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org