Subject: [Atlantica] spanwise flow controlled by flow fences
From: Paul
Date: 9/14/2000, 7:29 PM

DENIS SMITH wrote:

Some more good stuff from Klause.  Not specifically
reference Rotary, but pertinent to performance.
Note: forwarded message attached.


Alan:
Klaus Savier has tested flow fences on his VariEze with dramatic results in terms
of reduced takeoff distance, reduced minimum speed, and shortened landing distance
(by 30%).
http://www.pro.lightspeedengineering.com/KlausInfo/Flowfence.htm
 Could this be applied to the Atlantica?  If we're not sure, perhaps some hard
points could be put in the wing to allow testing flow fences in the future.

Wow 30% that is a bunch. BTW I gave Klause the 1/32 carbon fiber sheet material 
for those flow fences. I had some laying around for 15 years and was going
to throw it out :-) Notice the little white hash marks silk screened
on the black material? :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org