Subject: COZY: Ethanol in gasoline - vapor lock
Date: Fri, 15 Sep 2000 12:58:48 -0400
From: Carl Denk <cdenk@ix.netcom.com>
To: Canard Builders <cozy_builders@canard.com>
While recently on vacation in Southern South Dakota our Ford Bronco
vapor locked. May at first sound off topic, but there was recently a
thread on fuel injected auto engines with returning unused fuel to the
tank. Here are the details:
Fueled in Sioux Falls, S.D., grabbed wrong nozzle, 10% ethanol, 87
octane, instead of 85 octane straight gasoline. Was going to stop and
change, but didn't think it was an issue. after driving 300+ miles
around 80 mph with 2 brief rest stops, pulled off I-90 for fuel. THe
engine died at the end of the exit ramp, and would not restart.
snipped
Fuel system: In tank pump rated at 27.7 gallons/hour at 45 psi. or 22
gallons per hour returned to tank. Running conservatively to 7 gallons
in tank before refilling is 3 times an hour that fuel goes over the
engine. There is roughly 25 feet of 5/16" - 3/8" tubing between the tank
and engine mainly on the underside where airflow would seem to help to
cool.
2 Notes from the Ford service manual:
1: Electric valves for 2 tanks that route return fuel are used in some
applications.
2: The electric pump has a venturi pump with it to ensure fuel delivery
when the vehicle is in steep attitudes, remember this is a 4 wheel drive
SUV.
Charlie Kuss wrote:
Carl & listers,
Late model Ford products use plastic rather than steel fuel lines. This would
negate most of the assumed cooling taking place in the fuel lines. Another one of
Ford's "better ideas!" Wait till the vehicle is 10 years old and you try to
change the fuel filter or do any sort of service on the fuel system. Odds are the
plastic pipe will break, upping the cost (not to mention possible delays) of
repair.
Charlie Kuss
RV-8 wings
Boca Raton, Fl.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org