I just checked some old Mazda SAE papers and 150 HP is right in the
ball park for 5500 RPM and a four barrel carb. In Finn's case it is
a three barrel carb I think. Non tuned intake. Those long intake pipes
really help.
Paul Lamar
Bill Freeman wrote:
So that makes the BSFC 0.6. I think you need to look at some other
RV4s and see what HP they are pulling at 180 mph to help nail down
the HP and thereby, the BSFC. For instance, at 180 hp the BSFC is
0.5 and at 0.42 BSFC (not realistic to expect) the HP comes out to
214 HP. Finn needs to try leaning the F/A to stochiometric (with the
Oxy sensor) at this power setting and see how the engine likes it.
Excellent to get good flight test data like this, THANKS, Finn.
Bill
Finn Lassen wrote:
Ok, it's an RV-3, really!
I'll be happy to try to lean it to a reading of between .6 and .7 volts on
the oxy sensor, but please tell me, how?
It's really hard to remove the carbs, remove the jets, solder them shut,
drill a number lower, remount jets and carbs, all while flying :)
Finn
You should have put one of Tracy's EFI's on there Finn :-)
Paul Lamar
Bill Freeman wrote:
Sorry, Finn. I didn't understand that you don't have cockpit mixture
control.
OTOH, I do remember that some guys set a record flight of 54 days in
the 1930s by lowering fuel hose/cans from aircraft flying formation above
them and they had to climb out on a service scaffolding that they had
built alongside the Curtiss Robin's engine to change oil and sparkplugs
in flight. . . . SO, If you REALLY, REALLY wanted to . . . ;-)
Just joking, of course.
Bill
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org