I think the end is in sight on the water cooling problems from
what we are hearing from Chuck Dunlap. He is in a part of the country
that demands excellent cooling and his water system appears to be working
well. I would like to turn my attention to the oil cooling problem
which many are still having problems with.
Does anybody know the gallons per minute the oil pump is
flowing as a function of engine RPM?
Paul Lamar
"Ray Richardson Jr." wrote:
Dear rotary club;
Ok, Ok we did the water flow tests, with and
without restrictions and shared the results.
Now I suppose we also need to do the oil flow, with and
without oil to air cooler, and again to compare with our
oil to water cooler.
You guys knew we were going to do that next anyway,
so tomorrow we will, and I will share the results again.
All this testing is interfering with beautiful late summer flying.
Special thanks to Doug Dempsey
for writing the fine response about heat rejection.
Its people like this that makes this list worth while and also
makes our testing and sharing so worth while.
We do have some stock automatic flywheels for the poster
who needs one.
Ray Richardson Jr.
Powersport Aviation
Still don't know where your pressure tap for the water pump flow data
was Ray. Where was/is the pressure sensor located?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org