Mike Pienaar wrote:
Following on the post re coolant mass flow capacity:
Could someone please explain, in terms that an accountant could understand,
why the
addition of glycol to water alters the ability to absorb heat.
Why would you want to use a glycol mixture if it degrades your cooling system
efficiency by 50%?
Is there any thing that absorbs heat better than water that could be used in
the
radiator instead?
Thanks
Mike
Two reasons. Freezing and corrosion.
I don't know of one.
Paul Lamar
Mike, it's a combination of reasons, but it is a trade off. Water is about the
best coolant there is, but it boils at a low temp (212F). You can put a pressure
cap on the radiator to increase the boiling point, but if you add glycol you can
really increase the boiling point. In essence, you gain more by increasing the
boiling point, than what you give up in heat transfer loss.
Chuck Harbert
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org