Subject: A few stupid questions
From: Paul
Date: 9/20/2000, 11:44 AM


     > Mike Pienaar wrote:>      >
     > Following on the post re coolant mass flow capacity:Could someone please explain, in terms that an accountant could understand,why the addition of glycol to water alters the ability to absorb heat. Why would you want to use a glycol mixture if it degrades your
cooling system efficiency by 50%? Is there any thing that absorbs heat better than water that could be used in the radiator instead?
     >
     > Thanks
     >
     > Mike

     Two reasons. Freezing and corrosion.
     I don't know of one.

     Paul Lamar

Jean Fouche wrote:

     How about Redline Water Wetter?

     Jean Fouche
     South Africa

The 50/50 mix is more effective than you suggest, but nothing is as good as pure water for heat transfer.
a 10% glycol and water mix with some "WaterWetter" and a 7 pound pressure cap also raises the boiling temp of the water.

Lynn E Hanover
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org