For sale, i have a 13B-rew, twin turbo from the FD in japan. with all
parts.
$850,obo. very clean.
Al Gietzen wrote:
Just saw an engine from an '88 RX7, (complete and clean) at a local
dismantler (Oceanside, CA) a couple of days ago for $650.
Al
That sounds like an OK deal, but there is a bit diference between that and a '93 (or later) twin turbo with "all the parts". I wish I had seen that before I got my '91 for $1300.
Dave Leonard
Yeah. I know what you mean. I bought a junkyard engine for $900 and it was worse
than the engine and car offered to me for free.
Be careful guys when you buy those engines. A compression check should be
a minimum required inspection. If it don't have good compression or you
can't check the compression for some reason I would say don't pay over $300.
Any compression checker gauge will work if you can remove the schrader
valve (tire stem type valve).
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org