Subject: cooling capacity (was *not* stupid questions)
From: Paul
Date: 9/23/2000, 7:59 AM


Raising the boiling point prevents boiling but *reduces* cooling
effectiveness due to the loss of nucleate boiling.  Also, as mentioned
previously, the glycol reduces the heat transfer of the fluid.  This means
that the housing/wall will run hotter with a glycol mixture than pure water
for the same coolant temp.  That's the main reason racers run pure water.
When you're pumping the max possible power out of a given engine displacement
you need the most effective heat transfer possible at the source...pure water.

Jeff Spitzer

Here is another chart illustrating the heat flow from combustion chamber
to the coolant. 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

heat-trans-cyl-wall-d.gif