Was that oil seal red in color? If so I suspect it
is silicone. If it is red (mine is) and it is silicone it is not
recommended
for Alphatic and Aromatic Hydrocarbons and synthetic lubricants containing
silicone. This may be the key to why Mazda does not recommend synthetic
oil.
Is your rear oil seal leaking Tracy?
In any event a teflon or Kalrez seal with a steel spring will be rated
to 500 degrees F and has excellent resistance to almost all chemicals.
Paul Lamar
Tracy Crook wrote:
Mine have never leaked a drop in 1020 hours. FWIW, the story I heard on
the synthetic oil ban by Mazda was that they were having warranty failures
on catalytic converters due to synthetic oil cloging them up. Seems it
didn't burn as completely as mineral oil and made it through to the cats.
I've used synthetic oil (mobile 1) for the past 900 hours so I dismiss
stories about it causing engine or seal problems. OTOH, I don't inject it.
Was doing my pre-Copperstate flight inspection yesterday and found that the
muffler had finally given up. The wall had blown through where the header
tubes blast. Fortunately I had a SS heat shield over that area which kept
it from igniting the fiberglass cowl. Tommorow's project is to kludge up a
quick & dirty "Swiss" muffler system (glass-pack style muffler slung under
the fuselage). Don't have time to build a custom under the cowl muffler
before Copperstate.
Tracy Crook
rws@altavista.net
www.rotaryaviation.com
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org