> Was that oil seal red in color? If so I suspect it
> is silicone. If it is red (mine is) and it is silicone it is not
recommended
> for Alphatic and Aromatic Hydrocarbons and synthetic lubricants containing
> silicone. This may be the key to why Mazda does not recommend synthetic
oil.
>
> Is your rear oil seal leaking Tracy?
>
> In any event a teflon or Kalrez seal with a steel spring will be rated
> to 500 degrees F and has excellent resistance to almost all chemicals.
>
> Paul Lamar
Tracy Crook wrote:
Mine have never leaked a drop in 1020 hours. FWIW, the story I heard on
the synthetic oil ban by Mazda was that they were having warranty failures
on catalytic converters due to synthetic oil cloging them up. Seems it
didn't burn as completely as mineral oil and made it through to the cats.
I've used synthetic oil (mobile 1) for the past 900 hours so I dismiss
stories about it causing engine or seal problems. OTOH, I don't inject it.
Was doing my pre-Copperstate flight inspection yesterday and found that the
muffler had finally given up. The wall had blown through where the header
tubes blast. Fortunately I had a SS heat shield over that area which kept
it from igniting the fiberglass cowl. Tommorow's project is to kludge up a
quick & dirty "Swiss" muffler system (glass-pack style muffler slung under
the fuselage). Don't have time to build a custom under the cowl muffler
before Copperstate.
Tracy Crook
rws@altavista.net
www.rotaryaviation.com
Alfonso Lebron-Berges wrote:
I might be wrong but to the best of my limited understanding I
believe the so called synthetic oil is nothing else than highly
purified regular USED mineral oil (i.e.: your 10W/30 common brand)
that after use has already given up certain amount of hydrocarbons to
combustion, oxidation and degradation by heat.
If I am wrong, please correct me.
Probably this is what caused the problem to the Mazda cat. converter.
Just receiving oil that wasn't burned.
Alfonso Lebron-Berges
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org