Perry Mick wrote:

That happened last time, so I just sent the six gifs to you in a zip

and

you sent it to the list that way.  They are just gifs, I don't use a
Mac.
Can you track that zip down in the archive and see if you can unzip

it

ok?

Paul wrote:

Ok Perry I will give it a try. Can you zip them again?

Here is the same file again.  I know Jim West was able to unzip them
and print them out.

--
Perry J. Mick
Mick Duckt N7XR
http://www.ductedfan.com

Thanks Perry. That worked fine. I was able to unzip them using Linux
unzip and view and print them using Linux xv.

Paul Lamar

lonwood wrote:

Perry, thanks for sending your schematics again, I missed them the first
time around. They are very well done, quite professional.
They were too big to print in a normal Windows screen, no control that
I knew of to shrink them down, print preview would not do it.
 Ended up saving them as .bmp and printing
them in I-photo plus where they could be rotated and sized to fit on one
piece of paper. If there is an easier way in Windows could somebody
enlighten me.
Lonnie

Get Linux Lonnie :-) xv comes with Linux for free and does that sort 
of stuff lickity split.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org