Subject: Motor mounts integrated with redrive plate
From: Paul
Date: 10/9/2000, 5:09 PM

This is what I had in mind. It is more or less to scale as
I don't have a redrive plate or starter here at the house.

The view is from the front of the redrive looking back towards the flywheel.
Starter on right. Same side as the exhaust. Tractor airplane.
This is a preliminary sketch so there will be some minor changes.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org