Al Gietzen wrote:

Why on the plug side Al? I don't think there is room for the starter
between the bell housing mounting bolts on the plug side.

That's where it is on the stock 20B, and the housing is set up for it.
Also, for me gets it to a place where I have room; and away from the hot
exhaust pipe.

Al

That must be a Japanese 20B. The home made 20B using the 13B endhousing
the starter is on the exhaust side. If you move the pipes out away
from the engine and shield the starter there should be no problem.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org