John Slade wrote:
Whats wrong with the stock twin oil coolers on the '93. They seem light and
good quality.
I was thinking they would fit nicely, one either side of the rad. Chris
Harris tells me that with these fitted he had to add a manual shut off valve
on the oil line in his race car because otherwise the oil would run too cool
and take too long to heat up.
John Slade, Cozy MKIV #757, progress: http://kgarden.com/cozy
West Palm Beach, FL
Wow! I don't doubt you but that is news to me. The 1994 factory shop manual
only shows one square one in the left front fender well. It looks smaller
in area and volume than the 2nd gen cooler for some strange reason. Perhaps
Mazda decided the 2nd gen cooler was overkill for a light duty sports car.
I like the little spring clip that allows a quick disconnect for the
cooler plumbing however. The other interesting change is the return line
goes into the base of the oil filter rather than into the lower left
side of the rear end housing.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org