Paul,
With the file rvcool8, doesn't the oilpan that was "cut off with a die
grinder and welded on a flat piece of steel" interfere with the air coming
through the radiator? I think it would lower the effectiveness by being an
outlet restriction.

Bill Schertz
Kis Cruiser #45

I took a picture of my KIS Cruiser mock up Bill. Looks like plenty of room
for the angled rad and air coming out.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org