Paul,

 > With the file rvcool8, doesn't the oilpan that was "cut off with a die
 > grinder and welded on a flat piece of steel" interfere with the air

coming

 > through the radiator? I think it would lower the effectiveness by being

an

 > outlet restriction.
 >
 > Bill Schertz
 > Kis Cruiser #45

 I took a picture of my KIS Cruiser mock up Bill. Looks like plenty of room
 for the angled rad and air coming out.

 Paul Lamar

Looks good!
What is the tube coming out of the oil pan side?

Bill Schertz
Kis Cruiser #45

That is actually a wire I think and it is the oil sump level sensor.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org