Bulent Aliev wrote:

I found a very nice throttle body from 2L turbo Nissan. The ID is 2

5/16" . I

wander if it's big enough diameter for my NA 13B,
or I should look for a wider one?
Bulent

Ed Anderson wrote:

The 2 5/16" dia would only give you around 4.2 Square inches of inlet, the
three openings (45mm dia) on the 13B turbo throttle body I have give a total
of around 7.3 square inches, so I would think the Nissan one might be a
little on the small size.

Ed Anderson

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org