Subject: Tom Parkes turbo 3 rotor Lancair ES
From: Paul
Date: 10/22/2000, 9:31 AM


Paul,
How is the motor mounted?  I don't see trusses from the top of the firewall.
I see one motormount on the PSRU on the right side, and looks similar on the
left, but cannot make out where any triangulation is held.

Also, with the radiator at the back of the firewall, he needs to seal the
engine compartment to make it a pressure chamber.  How is this done?

Bill Schertz
Kis Cruiser #45

It is a bed mount tube truss. 1/2 inch plate brackets are bolted to the bell housing,
one on each side for rubber bushing. The rear mount is similar. My scanner 
is still up and down so I may have a few more pictures soon.
Tom may have some earlier pictures that better show the motor mounts.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org