Paul,
The lower radiator hose is resting on the exhaust pipe coming out of the
turbo!!! The turbo right next to the radiator can't be good for cooling. If
it is possible with this installation turning the turbo around so that the
exhaust is exiting forward as in your latest config maybe better. What is the
Tee fitting in the intake line under the starter intended for? What throttle
body and throttle position sensor is he using? What Subaru Engine does that
bellhousing come from?
Ed. pebvjs@aol.com
Sometimes a step backward is good to reconfirm what others have discovered.
Happens all the time in scientific research fields. Nothing wrong with
that and it punishes those nonbelievers by making them do it over :-)
One learns very well from doing things this way and it helps us all
confirm what we think we know.
The tee fitting in the intake line under the starter looks like a mount for
a turbo intake manifold pop off valve. Handy when the throttle is slammed shut
to prevent compressor stall.
Don't know what the throttle body and throttle position sensor are from. Tom?
"What Subaru Engine does that bell housing come from?" Don't know the answer
to that. Ross puts a big flange on all his castings and machines them to fit
specific engine bolt patterns.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org