Paul,
The lower radiator hose is resting on the exhaust pipe coming out of the
turbo!!! The turbo right next to the radiator can't be good for cooling. If
it is possible with this installation turning the turbo around so that the
exhaust is exiting forward as in your latest config maybe better. What is the
Tee fitting in the intake line under the starter intended for? What throttle
body and throttle position sensor is he using? What Subaru Engine does that
bellhousing come from?
Ed. pebvjs@aol.com
BTW I think Tom has room under the front of the engine for a Chuck Dunlap
type rad installation. If his rad location proves not to work moving it up
front does not seem to be such a big job. I would turn the turbo
exhaust 90 degrees and bring it out the side of the cowl as well.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org