Mike Wills
  I got the coils from Autozone this weekend. These arent a cheap knock off

of what you can buy at your Chevy dealer. They are the exact same
Nippon-Denso part - just $25 cheaper.

  Next question on these coils is plug wires. They have a non-standard

connection for plug wires so the commonly available universal wire sets
wont work. There is a male pin in the center of the socket that takes the
plug wire. Has anyone bought a set of plug wires for these with user
installed ends so they can be trimmed to the appropriate length? If so what
is the source?

Mike Wills

Mark Steitle wrote:

I have bought this type of plug wire from a parts house here in Austin called Van's, specializing in foreign stuff.  The wires I bought are one-piece, grey with black molded boots.  They had a rack of them in all sizes and configurations.  Don't know the brand though.
 

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org