Are they too new to be available at salvage yards? You should be

able to

transition to Tracy's harness with an in-line connector or a terminal
strip at the other end of the factory cable.

Charlie England

  Ive taken a quick look around here (San Diego) at salvage yards and so
far no deal. Salvage yards dont like to part out late model EFI engines and
definitely dont like to cut up the wiring harnesses. They apparently get
top dollar for these engines and harnesses from the hot rod crowd. I'll
keep looking. If someone comes up with the manufacturer (I doubt GM makes
em) and a source where we could buy direct, I'd like to hear about it.

Mike Wills

  I got the coils from Autozone this weekend. These arent a cheap knock off
of what you can buy at your Chevy dealer. They are the exact same
Nippon-Denso part - just $25 cheaper.

  Next question on these coils is plug wires. They have a non-standard
connection for plug wires so the commonly available universal wire sets
wont work. There is a male pin in the center of the socket that takes the
plug wire. Has anyone bought a set of plug wires for these with user
installed ends so they can be trimmed to the appropriate length? If so what
is the source?

Mike Wills

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org