Ken Powell wrote:

For Bruce Turrentine:
Bruce - Which lapping service are you presently using:
ROTORSPORTS RACING or LAPCO
Do I remember that you were not satisfied with one of these?
What is the present cost of the company you are using to lap all
4 surfaces?

Thanks,
Ken Powell

Ed Anderson wrote:

Ken,

    Rotorsports Racing and LAPCO both are here in the Charlotte, NC area.  I
have talked to both and LAPCO has done lapping for Rotosports and Bruce.  I
believe Bruce was going through Rotosports, but not certain.  When I talked
to LAPCO, they told me they charged $35 per surface lapped or around $140
for a set.  That does not include shipping, packing etc.  So if you bring
them in, you get a fairly good price.  Guy at LAPCO that handles this is
"Bob" (forget his last name, but only Bob there).

   Don't know which one Bruce was not satisfied with.  I was told that it
would 2 - 3 weeks at current work load before they could do a set.

Ed

Ed Anderson

Both Mazdatrix and Racing Beat having end housing lapping machines here on the west
coast.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org