Subject: Tom Jordans supercharged 13B
From: Paul
Date: 10/24/2000, 3:56 PM


Paul, from the picture Tom's EZ doesn't appear to be turbocharged, so is there a
supercharger? Also  is he using aluminum tubing to supply the psru oil feed?
Would suggest he chg to steel or a flex line. Also the rad hose appears to be
adjacent to the muffler which will be red hot (I assume that he hasn't flown it
yet).

Robin asked about noise from a 20B. You've listened to mine (3" straight pipe
(12" long) directly out of the turbo @ 45 deg) which although not quiet is less
noise than a 360 Lyco. A turbo acts like a muffler and IMHO is adequate w/o
additional muffling. A supercharger is just the opposite and really increases
the noise.
Chuck Harbert

Yours is fine too Chuck. Tom does indeed have a super charger and his engine
is REAL strong. As I recall it is about 5 psi boost at static RPM
around 4500 to 5000 RPM. I may need to look up those numbers on the CD.

Tom ran it up in his drive way and he was waving flags a block away :-).
Not all that noisy but you can look down the exhaust pipe with the engine
running and the guts are near transparent hot. I would not be a bit surprised
if it spits the muffler guts out through the prop. Tracy may have heard 
from Tom lately as Tom is using Tracy's EFI system.

I ragged him about that aluminum tube feeding high pressure oil
to the Ross gearbox. I hope he changed it.

He has flown it and had a minor crash that wiped out the gear.
That's been fixed quite some time OK so I assume he has flown it since then.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Tom-Jordan-roots-blower.jpg