Subject: ? for Tracy or Ed Anderson]
From: Paul
Date: 10/24/2000, 10:51 AM


In general, I have a lot of work to do on drag reduction.  I was talking to
a local RV-6 builder who has the second fastest RV-6 at 238 MPH (behind
Tracy Sailor) and got some interesting insights.  When I asked him how he
learned the best way to improve drag, he told me the best thing he learned
was to ignore the aeronautical sacred cows and start looking at the
airplanes that go fast (he goes to all the Reno races).  As an example, he
pointed out his wing intersection fairings.  He doesn't have any, just a
flush fit with a tiny rubber gap seal.  My plane has large wing
intersection
fairings designed using the results of some NACA study on intersection
drag.
They look cool but he said if I wanted to go fast I should remove
them.  I'm
going to try this and a bunch of other things he pointed out.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com



Mike Wills wrote:

Tracy,

  Ive heard the same thing regarding the root fairings. Steve Barnard who
has the fastest RV6A around has some wing root fairings he designed himself
(he's an aero engineer) and says they made no measurable performance
difference.

  I'd like to hear about some of the recommendations you got. Keep us
posted on performance improvements.

  In my opinion, in order for the Mazda conversion to get any respect (and
acceptance) from the airplane engine crowd, the airplanes these engines are
installed in have to perform at least as well as the best of their Lyc
powered counterparts. There was a Chevy powered RV6 entered in the
Copperstate dash this year. He was way slower than the other RV6s entered.
While strolling amongst the RV show planes I heard many comments about what
a dog that airplane was. I'm sure the guy who owns it loves it but I'd bet
his poor performance cost Jess Meyers some potential sales of his Belted
Air firewall forward package. More than one of these commentors mistook
this poor performing Chevy for Chuck Dunlap's Mazda powered RV6. You know
to the uninformed all of those auto conversions are the same.

Mike Wills



Now I remember. It was Steve Barnard that told me they worked at high
altitude :-) Picture below of Steve's  wing root fairing in question.


Very good points Mike and that is why I organized the Everett Hatch memorial
prize fund for rotaries faster than 200 mph in xcntry air races. I am a bit disappointed
that no one entered this year. Perhaps next year. I would be happy to
present the check.... even to Dave Atkins or Ray Richardson (God knows he does 
not need it.) :-) The fund is over $1500 in the bank collecting interest in 
a special account. I figure we have enough to cover all four races with a 
$500 dollar prize. One race will probably not
have an entry. If anybody wants to contribute more money feel free.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Steve-Barnard-wing-roots.jpg