Subject: ? for Tracy or Ed Anderson

A question for Ed or Tracy:
 What size AN fittings did you guys use for your A/C evaporators, and

what

size for the remote oil filter mount? I saw the $100 price for the

remote oil

filter setup from Racing beat and decided to make one from the existing

oil

filter mount. I just removed it and tapped a 1/4 npt into the holes, and

made

a plate to cover the mounting boss with 1/4 npt holes where the oil

passages

are. Total cost so far- $0.Just wanted  to know what size lines to run

to the

oil filter and oil cooler.  I'm figuring on two A/C evaporators running

in

parallel, with AN 10 fittings-- is that what you guys used? Thanks a

lot.

Brian Trubee
Redmond, Wa

Ed Anderson wrote:

Brian,

    I used AN-10 fittings/hose  for the oil system (had to use some adapters
for the block outlet/inlet) and AN-16 for the coolant fittings/hose for my
two A/C evaporator core radiator (which are plumbed in series).

Ed Anderson
Matthews, NC

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org