> > What are the dimensions of that stock oil cooler? My analysis of
the
stock
cooler some time back was that it provided about 2/3 the heat
rejection
capability we need for a 200 hp, 90 degree day climbout. Maybe I had
the
wrong data.
Al
Don't have one here. Anybody got one handy?
Ed Anderson wrote:
The Mazda Oil cooler I have fin area is 4.5 High x 2 Thick x 19 long with
the side tanks its length is close to 21" long.
Ed Anderson
John Slade wrote:
Just for comparison, I measured the twin oil coolers for my 3rd gen engine.
They're 10 (including the side tanks) * 5.5 * 2 giving a little more area
overall. I'd expect it would be easier to get air to them also, at least in
a pusher design with one either side of the rad.
John Slade, Cozy MKIV #757, progress: http://kgarden.com/cozy
West Palm Beach, FL
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org