Subject: 20B instruction discrepancies, and ignition pn's
From: Paul
Date: 10/25/2000, 7:35 AM


Tracy,
There is some descriptive problem in you 20B instructions I just
received. I
have been researching ordering the coils, harness and plug wires and
there is
a lot of uncertainty involved, as well as a lot of $. I will try and go
wholesale if available.
I was able to go in person to a more cooperative dealer (most will not
give
out pn's here) and weasel the pn's from them. Should have tried them
first.
Guess it depends on who you see at the parts counter, too, and the first
place was a supposed big racing parts supporter, too!
Your directions say LT1 engine model-that is incorrect, the Chev dealer
told
me LS1 only.
Supposedly, the 97 LS1 Vette used the system as well as the 98's and up.
Reportedly the 98 and up same engine Firebird and Cameros also used them
as
well as now some of the 2000 trucks. (It has to do with the "big engine
option-a 454?)
And I might add the stuff is hard to get, so having an extra coil on
hand
would be advisable.

Using the 98 LS1 Vette for parts reference-

This is the short list:

6 each coils (retail $54.60 ea dealer or 35.97 ea at Autozone) [I think
we
got this down. For sure it is
PN 12558948] The 20B needs one for each plug, or 6 total.
6x54.60ea=$327.60

2 each Chev "coil harnesses" . Supposed vette PN 15031401. (retail
quoted
was 77.00 each- which is cheaper than 6 coil plug connectors only @
retail
quoted price of 26.25 each). This is the one that has 4 each connectors
on
it, 4
pins in each connector for each coil unit. So I need 2 harnesses, and
will
have 2 extra connectors.
2x$77=$154.

6 each coil to spark plug wires-7.8" long. Supposed pn 12092064. (retail
$22.00 each now up from $17.50 just this month!). These reportedly also
have
the "special" coil plug end connector on em, I'm told. At Autozone, you
can
get the 98 Chev corvette Bosch # 09948, 8 wires kit, for $69.99, a much
better deal!
6x22=$132.

Total, dealer retail=$613.60 Lower if you buy stuff from Autozone.
Plus shipping/tax.

I never thought it would be cheap, but those parts are 2/3 $ of your
entire
computer!!!!
(PS, did you get my note on the redrive unit?)

Marc Wiese 20B .....

Always appreciate feedback on the instructions for my stuff Marc.  I have
made the change on the typo (LS1 instead of LT1) and listed Autozone as
another source for the coil.  Not sure if this is the extent of the
"descriptive problems and uncertainty" you mentioned but let me know if
there are other points that need to be clarified.  As far as the price of
coils and connectors goes, I'm sure you realize that I can't control what GM
and others charge for their stuff.  Or maybe you were just saying that the
EC2 is too cheap? :-)    Actually the Autozone price is not too bad
considering that it is a fairly hi-tech coil/ignitor with a magnetically
biased coil to increase spark energy without adding weight.  The quality of
Nipon Denso (maker of the AC Delco coil in question) stuff is second to
none.

If anyone knows of a better or cheaper coil/ignitor that would be suitable
for our use, let me know and I'll be happy to design around it.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org