Subject: Chuck Dunlap's s/s hose with wiggins.
From: Paul
Date: 10/26/2000, 5:32 PM


I am thinking about that SS hose. I was going to try to tig weld
to it and see what I can come up with.

Paul Lamar

George Lendich wrote:

Paul,
Thanks I hear what your saying. However on the SS hose -you won't weld
SS to aluminium (but I guess you know that), however if one side of the
fitting was
stainless (possible electrolysis effect) or the whole fitting was stainless.
But I'm assuming it's aluminium as you have mentioned it being welded to
alloy
radiators.
George (down under)


If I can tig weld on a short piece of 1-3/8 OD SS pipe I may be able
to bond that to the aluminum wiggins coupling with JB Weld or epoxy.
the other alternative is make the wiggins out of SS.

Paul Lamar

Hi Guys;
       First of all since the radiators we are/will be
using are made of aluminum, the prudent thing to do is
make the Wiggins out of aluminum also. If you're using
Chuck Dunlap's s/s hose then a s/s thin wall female to
male adaptor can be designed and manufactured to
transition from the O.D. of the s/s hose to the I.D. of
the Wiggins ferrule. My idea of this is to take a random
length of 1.375 O.D. s/s tubing, flare one end 1.56 to
1.625 O.D. of flare, polish and part in the lathe to
desired length, NEST the s/s hose for welding IN THE
FLARE. Any hydraulic shop can make this out of the scrap
barrel...............Or you can use a 1.25 tubing sleeve
from a JIC hydraulic fitting with very minor machining.

The Wiggins aluminum ferrule can then be epoxy'd on to
the male end of the s/s adaptor-hose.
This epoxy bonding will be a great barrier for preventing
electrolytic corrosion of dissimilar metals, as George
Lendich correctly pointed out.
IMO making the Wiggins in s/s just transfers this
problem to the costly, frail radiator, not to mention
that it would be very expensive and heavy.

BTW......I'm very convinced that the s/s hoses are
helping out a LOT in dissipating heat due to the non
smooth-grooved I.D. causing and sustaining turbulent
flow. That's a lot of area, the Reynolds numbers must be
going nuts in there :-)
I personally feel this is a BIG break through in our
cooling woes, thanks to Chuck Dunlap.
                                        Butch Diaz Sr.

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org