Subject: dimensions of that stock oil cooler
From: Paul
Date: 10/26/2000, 6:00 PM


Is a stock 20B oil cooler larger?  Chuck?

Al

I suspect they are somewhat more efficient than the Fluidyne and Griffin.
I think they have turbulators inside the oil passages. A rather expensive
way to make an oil cooler. I have never cut one apart however and I am not
about to cut a good one apart. Perhaps someone can find one in a junkyard
from a crashed car. BTW I think it was Griffen that supplied the coolers
to Chuck Harbert that split and caused the inflight fires.
Paul Lamar
 
I got the (faulty) oil coolers from Griffin, but it was not made by them. Al
told me he was getting a custom made heavy duty unit from Griffin (I think) for
about the same price as a new Mazda unit ($500). I don't know if the 20B turbo
oil cooler(s) are larger, but I suspect it probably is (365 hp vs 255 hp), or
they us 2. I know I had about 2 times the area/volume of oil cooling to keep my
temps below 200 F and that was at about 250 hp.  I'm hoping that the stock Mazda
cooler, plus the other 2 existing (nose) oil coolers will be adequate.

Chuck


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org