Paul,
The lower radiator hose is resting on the exhaust pipe coming out of the
turbo!!! The turbo right next to the radiator can't be good for cooling.
If
it is possible with this installation turning the turbo around so that
the
exhaust is exiting forward as in your latest config maybe better. What
is the
Tee fitting in the intake line under the starter intended for? What
throttle
body and throttle position sensor is he using? What Subaru Engine does
that
bellhousing come from?
Ed. pebvjs@aol.com
Sometimes a step backward is good to reconfirm what others have
discovered.
Happens all the time in scientific research fields. Nothing wrong with
that and it punishes those nonbelievers by making them do it over :-)
One learns very well from doing things this way and it helps us all
confirm what we think we know.
The tee fitting in the intake line under the starter looks like a mount
for
a turbo intake manifold pop off valve. Handy when the throttle is slammed
shut
to prevent compressor stall.
Don't know what the throttle body and throttle position sensor are from.
Tom?
"What Subaru Engine does that bell housing come from?" Don't know the
answer
to that. Ross puts a big flange on all his castings and machines them to
fit
specific engine bolt patterns.
Paul Lamar
Barnhart wrote:
Does someone know more details about the turbo intake maniflold pop off
valve? Does it work with other turbo controls, location requirements,
weight, etc.
Barny
These are widely used on turbo cars Barny. Get a copy of Turbo magazine or
better yet the book Turbochargers by Hugh Macinnes HP Books.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org