Subject: My 2 cents on Ross PSRU
From: Paul
Date: 11/3/2000, 11:22 AM



Paul, you're correct in that we did see asymetrical wear, but I also had
very high temperature (50-60 degF) increase of the oil going thru the box
which was indicating metal to metal contact. I spoke with a gear
lubrication expert (former Exxon Chief Lube Engr) who said that kind of
increase was unacceptable and that I needed more oil directly to the pinion
and planetaries, plus better oil. After the mods, my temp increase was in
the 20-30 degF increase, and my wear pattern stabilized (or seemed to)
after additional flights. Also, you need to increase the oil thruput by
scavenging (pumping) out the oil.

The problem seems to be the high centifugal forces (2-3,000 rpm at the ring
gear) keeping the oil from being transferred to the high loaded, high rpm
pinion and planetaries. The 2.86  gbox has fixed ring allowing the
planetaries to roll around in the oil continually which may help lube it.
Once your gears are galled, you have to buy all new ones which are very
expensive and you'll wait for months to get your box back.

I talked to Dave Atkins this afternoon about his experiences with the
modified gbox. He's got close to 100 hrs on it (3 times across the US) and
he says it's running great. Gbox oil temps are way down and the oil filter
is clean. He's had it apart a couple times to inspect the gears and they
look good. He ordered the Powersport gbox for a customer, not himself.
Chuck Harbert

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org