Paul,
The DWG. in JPG #1 shows the dimensions of the Escort manifold in the
pictures. I am suggesting that the U tube section be cut off the Escort
manifold and used along with lengths of straight tubing of the desired
lengths and the plate flange you made per the DWG. in JPG #4
Ed.  pebvjs@aol.com

Thanks ed I missed that on the first go around. Good idea.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org