Subject: My 2 cents on Ross PSRU
From: Paul
Date: 11/5/2000, 1:37 PM


Paul, you're correct in that we did see
asymetrical wear, but I also had
very high temperature (50-60 degF) increase of the
oil going thru the box
which was indicating metal to metal contact. I
spoke with a gear
lubrication expert (former Exxon Chief Lube Engr)
who said that kind of
increase was unacceptable and that I needed more
oil directly to the pinion
and planetaries, plus better oil. After the mods,
my temp increase was in
the 20-30 degF increase, and my wear pattern
stabilized (or seemed to)
after additional flights. Also, you need to
increase the oil thruput by
scavenging (pumping) out the oil.

The problem seems to be the high centifugal forces
(2-3,000 rpm at the ring
gear) keeping the oil from being transferred to
the high loaded, high rpm
pinion and planetaries. The 2.86  gbox has fixed
ring allowing the
planetaries to roll around in the oil continually
which may help lube it.
Once your gears are galled, you have to buy all
new ones which are very
expensive and you'll wait for months to get your
box back.

I talked to Dave Atkins this afternoon about his
experiences with the
modified gbox. He's got close to 100 hrs on it (3
times across the US) and
he says it's running great. Gbox oil temps are way
down and the oil filter
is clean. He's had it apart a couple times to
inspect the gears and they
look good. He ordered the Powersport gbox for a
customer, not himself.
Chuck Harbert

DENIS SMITH wrote:

The guys at Alturdyne said there were potential
problems with the Ross and foaming.  Anyone know more
about this?

I want to make it clear guys. There are a bunch of Ross PSRU's out there
working fine. You might even say of all the psru's on the market for the past
15 or so years the Ross has been the most widely used and most the successful.
Tracy has designed a redrive that builds on the good points of the Ross.
Namely the use of low cost and super light weight stock Ford C6 parts.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org