BTW Lorin what kind of machine tools do you have if any?
I an thinking of sending you a bunch of those large Barry mount 4130 washer
to be welded to two inch long pieces of .065 wall 1-1/4 inch dia 4130
tubing. Send me your address.
Lorin Thomason wrote:
Paul,
I guess I misunderstood about the Ross PSRU. I thought it used a mazda planetary
gearset. The AOD is a great trans. Very strong, much better than any GM counterpart.
Though there has been some problems with the units that are electrically controlled as
used on the Taurus' but it is a problem in the electical and servos not the trans design
itself.
Unfortunately I don't have any machine tools (lathe, endmill, etc) just normal hand
tools, grinders, abrasive saw, drill motors, etc. and my welding machines. However, I
have a very good friend in NM that is a very good machinist, a pilot, and a propulsion
engineer that might be able to supply any need you may have. But he does get pretty
busy with private aerospace contracts. His end mill was out here at his mother's place
for awhile and I had access to it, but he has since come and got it (It came in handy
when I installed a Thunderjet kit in my S&S carb on my Harley). Anyway, we worked
together for many years on different aerospace and private projects. I wish he hadn't
moved so damn far away. But the EPA has driven nearly all of the aerospace work out of
California! And in order to be competitive and work with the kind of materials needed
in the aerospace industry (especially solid fuels) he needed to be somewhere else and NM
is a mecca of aerospace activity. Let me know if you wish to get in touch with him.
I may have access to the machine shop at the local college as I have known the
instructor there for about 15 yrs. He's let me use the welding shop before when my
machine was down and needed to weld some fitings on a stainless fuel sphere for a
freinds land speed record vehicle. So it's possible I could use the machine shop also.
Depends on how involved it would get I would imagine. Never know what they are going to
get touchy about till you try.
You can send the washers anytime you are ready.
Lorin
OK Lorin I will cut the 4130 tubing on my friction saw. Is that OK or will
it screw something up?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org