Bill Freeman wrote:
So is it about 10 planet gears and about 2" of tooth width? What
about the sun gear size? This is an interesting example to compare
with others. At normal cruise of about 2500 hp, assuming about
2000 rpms, the torque would be 6565 ft-lb. WOW.
For the Mazda, say 200 hp at 2700 (prop) RPMs, gives a torque
of 389 ft-lb. So, the R4360 gearbox can carry almost 17 times the
torque which a Mazda PSRU needs to carry.
Wrathall Mark wrote:
The "corncob" was used in the late model super Corsair - Goodyear F2G. I
have seen it listed in the Reno results of the past. I bet they were feeding
a hell of a lot more than 2500hp through that box. The reduction ratio is
very low.
Mark Wrathall
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org