Subject: wankel compression tester NEW !
From: Paul
Date: 11/6/2000, 4:53 PM


I have been corresponding with this gentleman about this subject for some
time. Perhaps there is someone here who knows who may be interested in
"making" some of these commercially?

 Hello marc

 Cost of parts to construct (low volume) comes to around $100. No cost on
 development (since I did it for fun to use on my Ro80). The commercially
 available Mazda tester (the current electronic one) costs $1500 a go. That's
 a lotta doe.
 Transducer is built into an old spark plug, so you can fit it easy (not as
 much room for anything clever due to all those turbos you've got on a 7).
 It's been used on 20b's at the workshop where its on test.
 I would like to market it, but I haven't really got volume production
 facilities. Big difference between one offs for fun and mass production
 (specially since I have a day job). maybe I should contact a car test
 instrument maker and try and do a deal. Dunno whats best.

 Regards...   Rob.

 Justice For Daresbury!
 http://www.diamond.freewire.co.uk/index.htm
 Sign the guest book NOW!!
 For further information contact Susan Smith, s.l.smith@dl.ac.uk


 Rob. Smith
 Electron Beam Diagnostics and Pulse Power Section
 Synchrotron Radiation Department Radio Frequency Group
 The UK's Synchrotron Radiation Facility
 Daresbury Laboratory
 UK


  >>
I've got an electronic (digital at that) compression tester that I
built. out on test at a 7 specialist at the moment. Feedback so far is
good. My unit also checks for RPM using the compression pulses (helps
to find broken tips, a prob with the Mazda engine) and the next model
will have an analogue output from the transducer so that you can
follow it on a digital scope and get something like the 'tickatape'
waveform produced by the original mechanical Mazda unit (as seen on
Ebay). My units hand held, and the test can be performed from the
drivers seat.
Maybe I should produce a few to sell if there's any market. What do
you reckon. How much are they worth??.
I made mine for use on my NSU-Wankel Ro80 (so it measures in Bar,
sorry).

Best Regards...   Rob. Smith

Marc Wiese 20B .....


Hello marc

Cost of parts to construct (low volume) comes to around $100. No cost on
development (since I did it for fun to use on my Ro80). The commercially
available Mazda tester (the current electronic one) costs $1500 a go. That's
a lotta doe.
Transducer is built into an old spark plug, so you can fit it easy (not as
much room for anything clever due to all those turbos you've got on a 7).
It's been used on 20b's at the workshop where its on test.
I would like to market it, but I haven't really got volume production
facilities. Big difference between one offs for fun and mass production
(specially since I have a day job). maybe I should contact a car test
instrument maker and try and do a deal. Dunno whats best.

Regards...   Rob.

Justice For Daresbury!
http://www.diamond.freewire.co.uk/index.htm
Sign the guest book NOW!!
For further information contact Susan Smith, s.l.smith@dl.ac.uk

Rob. Smith
Electron Beam Diagnostics and Pulse Power Section
Synchrotron Radiation Department Radio Frequency Group
The UK's Synchrotron Radiation Facility
Daresbury Laboratory
UK

I would buy one, as long as it is also suitable on a 3 rotor engine!!! BTW,
it is worth at least $100 or so. I think someone else is also working on
this
idea but no one has actually put one out for sale! Be the first!!

Marc Wiese 20B .....


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org